Alpharetta, GA Heating & Cooling

In Alpharetta, GA, I completed a furnace maintenance task for a homeowner. I replaced the air filter, cleaned the flame sensor, and checked the gas pressure. After inspecting the heat exchanger, I confirmed everything was in good condition, ensuring reliable heating throughout the cold winter days.

I replaced a malfunctioning thermostat for a customer in Alpharetta, GA. The existing unit wasn’t properly controlling the heat pump, causing erratic temperatures. I installed a new programmable thermostat, calibrated it to match the system, and tested its operation. The customer now has accurate and consistent temperature control.

I replaced a malfunctioning thermostat for a customer in Alpharetta, GA. The existing unit wasn’t properly controlling the heat pump, causing erratic temperatures. I installed a new programmable thermostat, calibrated it to match the system, and tested its operation. The customer now has accurate and consistent temperature control.

I replaced a malfunctioning thermostat for a customer in Alpharetta, GA. The existing unit wasn’t properly controlling the heat pump, causing erratic temperatures. I installed a new programmable thermostat, calibrated it to match the system, and tested its operation. The customer now has accurate and consistent temperature control.

I replaced a malfunctioning thermostat for a customer in Alpharetta, GA. The existing unit wasn’t properly controlling the heat pump, causing erratic temperatures. I installed a new programmable thermostat, calibrated it to match the system, and tested its operation. The customer now has accurate and consistent temperature control.

I worked on a Carrier Performance heat pump in Alpharetta, GA that wasn’t heating properly. Upon inspection, I found low refrigerant levels due to a small leak in the evaporator coil. I sealed the leak, recharged the refrigerant, and tested the system. The heat pump was back to full functionality.

I worked on a Carrier Performance heat pump in Alpharetta, GA that wasn’t heating properly. Upon inspection, I found low refrigerant levels due to a small leak in the evaporator coil. I sealed the leak, recharged the refrigerant, and tested the system. The heat pump was back to full functionality.

I worked on a Carrier Performance heat pump in Alpharetta, GA that wasn’t heating properly. Upon inspection, I found low refrigerant levels due to a small leak in the evaporator coil. I sealed the leak, recharged the refrigerant, and tested the system. The heat pump was back to full functionality.

I worked on a Carrier Performance heat pump in Alpharetta, GA that wasn’t heating properly. Upon inspection, I found low refrigerant levels due to a small leak in the evaporator coil. I sealed the leak, recharged the refrigerant, and tested the system. The heat pump was back to full functionality.

I replaced a worn-out blower motor on a Lennox Elite furnace for a client in Alpharetta, GA. The old motor had started making loud noises and eventually stopped working. I installed a new motor, balanced the blower wheel, and tested airflow. After checking the system, everything was running smoothly and providing consistent heat throughout the home.

I replaced a worn-out blower motor on a Lennox Elite furnace for a client in Alpharetta, GA. The old motor had started making loud noises and eventually stopped working. I installed a new motor, balanced the blower wheel, and tested airflow. After checking the system, everything was running smoothly and providing consistent heat throughout the home.

I replaced a worn-out blower motor on a Lennox Elite furnace for a client in Alpharetta, GA. The old motor had started making loud noises and eventually stopped working. I installed a new motor, balanced the blower wheel, and tested airflow. After checking the system, everything was running smoothly and providing consistent heat throughout the home.

I replaced a worn-out blower motor on a Lennox Elite furnace for a client in Alpharetta, GA. The old motor had started making loud noises and eventually stopped working. I installed a new motor, balanced the blower wheel, and tested airflow. After checking the system, everything was running smoothly and providing consistent heat throughout the home.

installed full systems 15seer trane

Alpharetta heating emergency response. Diagnosed intermittent blower motor failure. Replaced ECM motor with high-efficiency model. Checked belt alignment and tension. Conducted electrical resistance tests on motor windings. Verified proper airflow and system operation.

In Alpharetta, GA, I repaired a Rheem RP15 heat pump experiencing refrigerant leaks. After locating the issue in the evaporator coil, I sealed the leak, recharged the system with R-410A refrigerant, and checked superheat and subcooling levels to verify system performance.

I repaired a Rheem Prestige Series gas furnace in Alpharetta this morning, that had a malfunctioning igniter. I replaced the faulty igniter with a compatible OEM part and inspected the gas valve and flame sensor. The furnace was tested and restored to safe operation.

No cool service call performed by Derrick in Alpharetta, GA.

No cool service call performed by Derrick in Milton, GA.

Heber completed an AC tune up per Service Agreement on a Trane unit for a customer in Alpharetta, GA.

Heber competed an AC tune up on a Lennox unit for a customer in Alpharetta, GA.

Marcio and Andy installed a 2.5 ton Lennox evaporator coil for the air handler for a customer in Alpharetta, GA. Added 8 pounds of 410A refrigerant and unclogged the drain line. Unit is working upon completion.

Chris performed an AC tune up on a Lennox unit per Service Agreement for a customer in Alpharetta, GA.

Chris performed an AC tune up on a Lennox unit per Service Agreement for a customer in Alpharetta, GA.

Chris performed an AC tune up on a Lennox unit per Service Agreement for a customer in Alpharetta, GA.